Horizontal Blinds
Measuring Guide

Horizontal miniblinds or wood blinds or faux wood blinds not what you want?
To see other window treatments, CLICK HERE.

Product Name: _________________________
Name of Room: ___________________
Quantity: _____
Width: __________
Height: __________
Slat Color: _________________________
Cloth Tape Color: ________________ (optional)
Controls: Tilt ____ Lift ____ (left or right)
Mount: _____ (inside or outside mount)
Tilt Type: ________ (wand/cord - cord for 2" only)
Options: ____________________ (see below)
Hold Downs: __________ (outside mounts only) 		Product Name: _________________________
Name of Room: ___________________
Quantity: _____
Width: __________
Height: __________
Slat Color: _________________________
Cloth Tape Color: ________________ (optional)
Controls: Tilt ____ Lift ____ (left or right)
Mount: _____ (inside or outside mount)
Tilt Type: ________ (wand/cord - cord for 2" only)
Options: ____________________ (see below)
Hold Downs: __________ (outside mounts only)

Product Name: _________________________
Name of Room: ___________________
Quantity: _____
Width: __________
Height: __________
Slat Color: _________________________
Cloth Tape Color: ________________ (optional)
Controls: Tilt ____ Lift ____ (left or right)
Mount: _____ (inside or outside mount)
Tilt Type: ________ (wand/cord - cord for 2" only)
Options: ____________________ (see below)
Hold Downs: __________ (outside mounts only) 		Product Name: _________________________
Name of Room: ___________________
Quantity: _____
Width: __________
Height: __________
Slat Color: _________________________
Cloth Tape Color: ________________ (optional)
Controls: Tilt ____ Lift ____ (left or right)
Mount: _____ (inside or outside mount)
Tilt Type: ________ (wand/cord - cord for 2" only)
Options: ____________________ (see below)
Hold Downs: __________ (outside mounts only)


IMPORTANT NOTES ABOUT MEASURING:
  • Always use a steel tape measure
  • Measure down to the eighth of an inch
  • Remember that inside mounts have deductions taken by the factory (Approx. 1/2")
  • Measure Width in three places & use smallest Width
  • Measure Height in three places and use tallest Height
  • Width always comes first, then Height
  • Cloth tapes are optional on certain products
  • Valances on horizontals are made a little wider than window - You must request valance to be exact width if you are mounting blind back towards glass.
  • Please review online installation instructions for a better idea of how Horizontals mount
  • Spacer Blocks are for clearing casing when mounting as an outside mount above casing
Print this page Print this page